Ortho-Ease™ Blue Gel Etch Syringe Kit (470-160)

Water soluble gel that simplifies the etching process. The syringe allows ease in use in hard to reach teeth.

The blue gel is visible on teeth for precise placement with minimal waste. Each syringe pack comes with 20 bendable wire tips that are disposable.

Kit Contents:

  • Disposable Syringes (4) each with 4 grams of Gel (37% phosphoric acid)
  • Disposable Syringe Tips (20)
 
Gel Etch Econo-Syringe (470-162)
Green-colored etch is the same 37% phosphoric acid formula as above but dispensed from large 12 gram syringe. (25 disposable plastic tips are included with each syringe.)
 
Mini Sponge Applicators (480-015)

Specially designed for application of liquids, etches and resins to teeth. Using tweezer, each sponge can be picked out from pre-moistened jar and dipped in liquid before applying to desired area.

Mini-sponges may be used during bonding to apply etchant or any liquid, such as primers, conditioners, etc.

(200 Mini-Sponges in a convenient plastic jar.)
 
Power Bond™ O.L.C. Light-Cured Bonding Conditioner (471-062)
Increases bond strength dramatically. Ideal for bonding to acrylic, composite or metal surfaces or any enamel surface where maximum adhesion is desired. Pre-mixed, one-step conditioner should be brushed on bracket base prior to applying adhesive. Conditioner ensures a strong bond between the bracket base and the adhesive.
 
Power Bond™ O.S.C. Self-Cured Bonding Conditioner
Ideally suited for bonding to acrylic, composite or metal surfaces or any enamel surface where maximum adhesion is desired. A self-cure, two part formula. Increases bonding strength dramatically. Mix part "A" and part "B" then brush on bracket base prior to applying adhesive.
 
Advantage™ Porcelain Bonding Conditioner (480-013)(16cc)
Prepares dental porcelain for metal or ceramic bond brackets. Primer is a saline coupling agent which helps to chemically bond the adhesive to the porcelain.
 
Plastic Bracket Conditioner (470-170) (10cc)
Prepares plastic brackets for direct bonding. Conditioner should be brushed on the plastic base prior to applying the adhesive. The conditioner will then provide a strong bond between the bracket base and the adhesive. Must be refrigerated when not in use.