|
Permanent "Stay Soft" Elasticity, High
Strength
- Combines two important advantages in one material: long-term
adherence to new or existing denture bases and a smooth, hydrophobic
silicone surface that repels bacteria
- Greatly improved customized fit - reline fully cured in mouth
for superior adaption and less chance of distortion (no heat reaction)
- Lasting elasticity for superior comfort (remains soft even after
years of wear)
- Smooth, hydrophobic, non-porous silicone surface repels bacteria
- Tissue compatible, no odour, no taste, will not discolor
- Short setting time of only 5 mins. 30 secs. (total working time
2 mins. 15 secs; intra-oral setting time: 3 mins. 15 secs.)
- Cartridge system for simple handling properties and exact dispensing
(including the silicone sealant)
- Indicated for direct chair side relines of full, partial and
specialty dentures, as well as implant overdentures (indirect
relines also easily accomplished)
- Easily adjusted or repaired (even after being worn for long
periods)
|
 |
"New Mucopren Soft is the answer to every dentist's
prayers for a quick, reliable, patient pleasing in-office reline material.
A must for every dentist doing partials and dentures."
- Joseph J. Massad, D.D.S.
Simple, Fast Technique
- Clean and dry the denture thoroughly.
- Use a bur to relieve the surface to the desired depth of soft liner.
To create a neat vestibular juncture between the soft liner and denture
acrylic, it is advisable to trim the periphery to a right-angle.
- Brush two thin coats of Mucopren adhesive onto the roughened surface
and air-dry for at least 90 seconds.
- Apply Mucopren soft uniformly to prevent entrapped air (keep the tip
of the syringe in the material). Insert the denture into the patient's
mouth immediately and carry out active and passive functional excursions.
- Once the material has hardened, remove the dentures. Trim excess material
with scissors, a scalpel or rotary instrument creating a neat juncture
between the denture acrylic and soft liner. Trimmed acrylic areas can
be polished as usual.
- Apply a thin coat of Mucopren silicone sealant to the trimmed areas
of the soft liner and allow it to harden for 5 minutes. (Note: place
a small amount of Mucopren sealant in a suitable container and brush
on within 60 seconds).
- When relining indirectly, apply adequate amounts of separating agent
to the model. To ensure the setting time remains the same, place the
soft liner in a pressure vessel with water at 35° C.
| Prod. No. |
Description |
| 43.750 |
Mucopren Soft Introductory Kit |
Contents:
- 48 ml cartridge Mucopren Soft
- 48 ml Mucopren Silicone Sealant
- 10 ml Mucopren Adhesive
- 7 x 7.5 mm mixing tips
- 20 x 3.0 mm mixing tips
- 1 brush holder
- 20 disposable brushes
- Accessories
| Prod. No. |
Description |
| 43.751 |
Mucopren Refill (2 x 48 ml cartridges Mucopren soft) |
CALL TOLL FREE 1-866-372-3786
24 HOUR TOLL FREE FAX 1-800-361-5088
Email: products@aurumgroup.com
|
